Brass Rods

The range of Brass Rods manufactured by us is valued for its excellent cutting & drilling performance, high conductivity, and corrosion resistance. These brass tension rods find applications in various sectors mentioned below:

Specifics :

  • Hardware
  • Electric & Electronic Components
  • Fittings

Forging Brass Rods –

  • ASTM B 124 C37700
  • BS 2874 CZ 122
  • IS 3488 Forging Brass
  • IS-8737
Chemical Requirements CuZn42Pb2 CuZn40Pb2 IS-8737
Copper 56.5 – 60.0% 57.0 – 59.0% 56.5 – 60.0%
Lead 0.60 to 2.0% 1.5 to 2.5% 1 to 2%
Iron 0.30% max 0.40% max 0.30% max
Mn 0.5% min
Total Imp. Excl. Iron 0.20% max 0.70% max 0.75% max
Zinc Remainder Remainder Remainder
 

Physical Properties

Tensile Strength 380 Mpa Min 40 kg/mm2 Min. 392 kg/mm2 Min.
Elongation % 25% Min 18% Min. 18% Min.
Izod Value 2.0 KJ min 2.2 KJ min
 

Fabrication Properties

Capacity for being
Cold worked Poor Poor Poor
Hot formed Excellent Excellent Excellent
Hot forgeability rating 100% 100% 100%
Machinability Rating 80% 80% 80%
Suitability for soldering Excellent Excellent Excellent
Suitability for Brazing Good Good Good
Uses
Forged Components, Industrial Valves, Defense components, Watch Case, Automobile Valves Components,LPG Gas Cylinder Valves

 


High Tensile Brass Rods

  • IS 320 HT1 or HT2
  • BS 2874 CZ114 or CZ115
  • JIS 3250H C6782 or C6783
Chemical Requirements HT1 HT2
Copper 56.0 – 60.0% 56.0 – 61.0%
Lead 0.20 to 1.50% 0.50 to 1.50%
Iron 0.20 to 1.25% 0.20 to 1.50%
Tin 0.20 to 1.0% 1.0% max
Aluminum 0.2% max 0.30 to 2%
Manganese 0.25 – 2.0% 0.50-2.0%
Total Imp. 0.50% max 0.50% max
Zinc Remainder Remainder
 

Physical Properties

Condition Size T.S. MPa EL% Min T.S. MPa EL% Min
As manufactured All Size 430 min 20% 460 min 20%
Cold-worked & Stress 10-40 480 min 12% 520 min 12%
Relieved 40 above 500 min 15%
 

Fabrication Properties

Capacity for being
Cold formed Poor Fair
Hot worked Good Good
Machinability Rating 30% 30%
Resistance to Corrosion Excellent Excellent
Suitability for soldering Excellent Fair
Uses
HT1 is suitable for Soldering
Ht2 is suitable for Machining

 


Riveting Brass Rods

  • IS 4170 CuZn40
  • BS 2874 CZ109
  • JIS 3250 H C2800
  • ASTM B171 C 36500
  • IS 4413 CuZn37
  • BS 2872 CZ108
Chemical Requirements CuZn35Pb1 CuZn35
Copper 62.0 – 65.0% 63.0 – 68.0%
Lead 0.75 to 1.50% 0.02% max.
Iron 0.10% max 0.05% max
Total Imp. 0.50% max 0.30% max
Zinc Remainder Remainder

 

Physical Properties
Condition T.S. MPa EL% Min T.S. MPa EL% Min
Quarter Hard (HA) 325-390 30% 340-345 30%
Half-Hard (HB) 400-490 20% 420-510 15%
Hard (HD) 500-685 15%
Extra Hard (HE) 695-885 5%

 

Fabrication Properties
Capacity for being
Cold forming Excellent
Machinability Rating 70%
Bending Excellent
Riveting Excellent
Uses
Ductile Alloy with good combination of bending as well as cold heading properties

Free Cutting Brass Rods

  • ASTM B 455
  • B 16 C 38500
  • C 36000
  • BS 2874 CZ – 121Pb3 or CZ124
  • IS319 Grade I/ II/ III
  • JIS3250 H C3604 or C3602
Chemical Requirements Grade I
Copper 56.0 – 59.0%
Lead 2.0 to 3.50%
Iron 0.35% max.
Total Imp. Excl. Iron 0.70% max.
Zinc Remainder
 

Physical Properties

Condition Size T.S. MPA EL% Min
Annealed (O) 6-25
25-50
50 above
345
315
285
12
17
22
Half-Hard (HB) 6-12
12-25
25-50
50 above
405
395
355
325
4
6
12
17
Hard (HD) 6-12
12-25
550
490

4
 

Fabrication Properties

Capacity for being
Cold worked Poor
Hot formed Fair
Machinability Rating 100%
Suitability for soldering Excellent
Suitability for Brazing Good
Uses
Precision Components, Hardware, Hinges, Lock Bodies, Screws, Nuts & Bolts

 

Chemical Requirements Grade II Grade III
Copper 60.0 – 63.0% 60.0 – 63.0%
Lead 2.50 to 3.70% 0.50 to 1.50%
Iron 0.35% max 0.20% max
Total Imp. Excl. Iron 0.50% max 0.50% max
Zinc Remainder Remainder
 

Physical Properties

Condition Size T.S. T.S. MPA EL% Min T.S. MPA EL% Min
Annealed (O) 6-25
25-50
50 above
355
305
275
15
20
25
315
285
255
22
27
32
Half-Hard (HB) 6-12
12-25
25-50
50 above
395
385
345
315
7
10
15
20
355n
345
305
285
8
12
22
27
Hard (HD) 6-12
12-25
550
485
4 460
400
4
 

Fabrication Properties

Capacity for being
Cold worked Poor Fair
Hot formed Fair Excellent
Machinability Rating 90% 80%
Suitability for soldering Excellent Excellent
Suitability for Brazing Good Excellent
Uses
Gr II : Gear, Pinions, Precision, Automobile, Electronic Parts
Gr III : Precision Components Machining with Riveting Operation

 


Profile and Flats Brass Rods

  • BS249
  • IS: 319 Gr. l & ll
  • IS: 8364 Gr. l & ll
  • BS: 2874 CZ121Pb3
  • CuZn39Pb3

Nickel Silver

  • IS 10757 Nickel Silver
  • BS 2874 NS101
  • ASTM C79830

Naval Brass Rods

We fabricate a finest range of Naval Brass, which are renowned for their high strength, rust proof and durability features. Naval brass is a copper alloy containing 60% copper, 75% tin and around 39.25% zinc. These are made up of high-grade raw material and can be availed in the form of sheet, plate, rods and circle. Our range of naval brass is broadly used in marine and construction industry.

Specifics:

  • Naval Brass – IS: 291 Gr l & ll

Specifications:

Rod Brass
  • ASTM B135 C 23000
  • BS 2870 CZ 102
  • JIS H3300 C 2300
Naval Brass
  • IS291 Grade I or II
  • BS 2874 CZ 112
  • JIS 3250 C4622
  • ASTM C48200

 

Chemical Requirements Garde I Grade II
Copper 61.0 – 64.0% 59.0 – 62.0%
Lead 0.20% max 0.50 to 1.0%
Tin 1.0 to 1.50% 0.50 to 1.0%
Iron 0.10% max
Other Imp. 0.20% max 0.20% max
Zinc Remainder Remainder
 

Physical Properties

Condition Size T.S. 2 Kg/mm2 EL% Min T.S. 2 Kg/mm2 EL% Min
Half-Hard (HB) Upto 12.5
12.5 to 50
50 to 100
40 min
38.5 min
35 min
18%
18%
18%
40 min
40 min
40 min
15%
15%
15%
 

Fabrication Properties

Capacity for being
Cold Worked Fair Poor
Hot Worked Excellent Good
Machinability Rating 30% 50%
Forgeability Rating 90% 90%
Silver Alloy Brazing Excellent Excellent
Soft Soldering Excellent Excellent
Oxyacetylene Welding Good Not Suitable
Uses
Gr I : Condenser Components, Propeller Shaft, Marine hardware where bending is required.
Gr II : Marine Hardware, Screw Machine, Valve Stems and Components for Naval use.

 


Brass Hollow Rods

Brass hollow rods offers significant economic advantages, by way of removing the need for drilling operations, and very often the boring out of the parts.

Numerous applications, and in particular for the making of taps and valves (plumbing-heating industry), use many components that require the boring out of parts.

Industrial Application :-
Widely uses in automobile industry for synchronizer range and bearing cage and brass retainer.

Chemical Requirements

Copper Lead Iron Total Imp. Zinc
Free Cutting Brass Hollow Rods BS 2874/86- Cz121 Pb3 / CZ124
Grade I 56.0 – 59.0% 2.0 – 3.50% 0.35% max 0.70% max Remainder
GradeII 60.0 – 63.0% 2.50 – 3.70% 0.35% max 0.50% max Remainder
GradeIII 60.0 – 63.0% 0.50 – 1.50% 0.20% max 0.50% max Remainder
Forging Brass Hollow Rods CZ 122 / IS 8737
CuZn42Pb2 56.5 – 60.0% 0.60 – 2.0% 0.30% max 0.20% max Remainder
CuZn40Pb2 57.0 – 59.0% 1.50 – 2.50% 0.40%max 0.70%max Remainder
Lead Free Brass Hollow Rods BS2874/86 , IS 4170/67, CZ109 BS2872/86 / IS 4413/81, CZ108
CuZn40 59.0 – 62.0% 0.75% max 0.10% max 0.30% max Remainder
CuZn37 62.0 – 65.0% 0.30% max 0.10% max 0.60% max Remainder
CuZn35 63.0 – 68.5% 0.05% max 0.05% max 0.30% max Remainder
CuZn30 68.5 – 71.5% 0.05% max 0.05% max 0.03% max Remainder

 


 

Lead Free Brass Rods

These rod are also known as Reverting Quality Brass Rod and is mainly used in blanking, riveting , bending, hot forging, watch case and belts, etc.

  • IS4413
  • IS4170
  • DTD-627
  • BS2874/86 CZ-109
  • BS2872/86 CZ-108

Chemical Requirements

 

CuZn40 CuZn35 CuZn37 CuZn30
Copper 59.0 – 62.0% 63.0 – 68.5% 62.0 – 65.0% 60.5 – 71.50%
Lead 0.75% max 0.05% max 0.30% max. 0.05% max.
Iron 0.10% max 0.05% max 0.10% max 0.05% max
Total Imp. 0.30% max 0.30% max 0.60% max 0.30% max
Zinc Remainder Remainder Remainder Remainder

 

CW713 High Tensile Brass

CW713R is a high tensile brass which is alloyed with aluminum, manganese and silicon etc. whichmakes this alloy almost as hard as aluminum bronze, but considerably easier to process. CW713R also has good corrosion, wear resistance and machinability.

Typically this alloy is used in the automotive and hydraulic industries in forms of products such as Bearings for high load, slide-& wear-plates, valve guides, piston parts etc.

Chemical Composition

Cu Pb Sn Zn Si Ni Fe Al Mn Other
Min 57 0.2 0.3 1.3 1.5
Max 59 0.8 Max 0.4 Rem 1.3 Max 1.0 Max 1.0 2.3 3.0 Max 0.3

 

Product Details:

Minimum Order Quantity 250 Kilogram
Material Grade CW713
Shape Round
Usage/Application Automotive and Hydraulic
Diameter 1 mm To 220 mm
Composition As per CW713
Tensile Strength 540 N mm2
Elongation 12
Temperature 500 to 600
Color Yellow
Hardness 160 HB
Material Brass
Packaging Type Wooden
Standard CW713
Astm C67400
Alloy Or Not YES

 


Brass Profile

We are one of the leading manufacturer and suppliers of Brass Profile. Under the guidance of our experienced professionals, this profile is manufactured using supreme quality raw material and modern technology. Our offered profile is appreciated for its rust proof feature. Provided profile is checked by our quality experts to provide defect free range to our clients. Further, our clients can avail this profile at cost-effective prices

Industrial Application:

  • Used in locks and safety equipments, auto parts, engineering industries

Additional Information::

  • Production Capacity: 100 Ton
  • Delivery Time: 4-5 Week

Product Details:

Minimum Order Quantity 250 Kg
Glass Thickness A per Drawing

 


Brass Flat

We provide High Quality Brass flat Wire with Bright surface finishing and brass colour,widely uses in Zipper Industries suitable for teeth formation ,bending and punching work, top and bottom stopper.

And suitable for electronic industries for punching work.

Additional Information:

  • Minimum Order Quantity: 250 Kilogram
  • Production Capacity: 6000
Scroll to Top
WhatsApp WhatsApp us